Lycon Complete Precision Kit

With LYCON’s new LYCOpro Duo heater, you can heat 2 waxes at the same time…LYCOdream hybrid hot wax; the NOW! must have wax, and LYCON SoBerry strip wax, along with all the essentials for the most perfect waxing experience for the face, body and Brazilians. This is the kit that will make you stand out amongst professionals.

• LYCOpro Duo Wax Heater

• LYCOdream Hybrid Hot Wax 1KG

• SoBerry Delicious Strip Wax 800ML

• Lycotane 125ML

• Pre Waxing Oil 125ML

• Tea Tree Soothe 125ML

• Tea Tree Perfect 125ML

• Wax Solvent 125ML

• Ingrown-X-it 5ML

• Lycon Slanted Tweezers (pink)

• Lycon Tongue Depressors 100PK

• Epilace Waxing Strips 250PC

Remove lid and fill the metal insert(s) with a hot or strip wax of your choice. DO NOT put wax directly into the heating chamber, only in the removable inserts. NOTE 1: LYCON 800ml (27 fl.oz) strip wax jars are heat friendly and can be put directly in the heater without an insert. Plug into power point and turn regulator dial clockwise to switch heater on. To speed up hot wax heating, first turn the dial to 10 for at least 30 minutes, depending on how much wax is in the insert. When relatively melted, reduce heat and allow wax to cool to working temperature. For strip wax, heat on 10 until all wax is melted, then reduce heat slightly to maintain working temperature. As all wax melting points vary, it is best to determine the most comfortable temperature setting for the wax you are using. For hot wax, the working temperature is around 4 - 6 on the dial. For strip wax, the working temperature is around 8 on the dial. The actual wax temperature is a few degrees lower, due to using an insert. To increase temperature, move regulator dial clockwise. To reduce temperature, move regulator dial anti-clockwise. When wax is hot, always use the removable insert handle to lift the metal inserts out of the heater. To test wax temperature, stir wax well until it is a uniform consistency and then immerse a probe thermometer into the centre of the wax insert. Hold the thermometer in the center of the wax until it reaches its maximumtemperature. Temperature conditions and climate can affect the wax temperature and performance, particularly when the weather is cool or in air-conditioning. Stir the wax from time to time while working in order to keep the consistency and temperature of the wax uniform. Before waxing, always test wax for a comfortable working temperature. To test hot wax, apply a small patch on your inner wrist. To test strip wax, apply a thin film on the back of your hand or forearm. If wax feels hot, lower the heat setting and allow wax to cool. If wax is too cool, increase the heat setting to heat wax up further. Test wax again before using on a client. LYCON recommends sterilising hot wax 2 - 3 times a week by heating the wax on 10 until wax is completely melted and then leave wax on this setting for another 30 - 40 minutes. Then turn the regulator dial back to the working temperature setting for the type of wax in the heater and allow wax to cool to a comfortable working temperature. Before using wax on clients, always test wax for comfortable working temperature as per the above instructions. Always read and follow all safety instructions on the label of your wax products It is advisable to use a disposable protective wax insert collar for easier heater cleaning. It is advisable to clean the heater with LYCON Wax Solvent after each appointment.