Colortrak Pride Continuous Spray Bottle

PRIDE Continuous Spray Bottle 10oz is perfect for stylists who want an even, continuous distribution of water.

Bottle allows for a faster, wider range of saturation

Features Interior Infini-Spray technology

Fine mist distributes water evenly

• Fill the Bottle: Unscrew the top sprayer head and fill the bottle with clean water (avoid using oils, heavy chemicals, or thick liquids, which can clog the fine-mist nozzle). • Seal and Close: Screw the sprayer head back onto the bottle tightly. • Prime the Pump: For first-time use or after a deep clean, slowly pump the trigger 5 to 6 times to activate the internal Flairosol / Infini-Spray technology. Do not pump too rapidly, as this can interrupt the pressure build-up. • Spray Continuously: Press and release the trigger to produce a fine, steady mist that lasts for about 3 seconds per pull. You can pull the trigger repeatedly in quick succession to maintain a longer continuous stream. • Use at Any Angle: The 360-degree design allows you to spray smoothly from upright, sideways, or even upside-down positions. • Unclogging (if needed): If the spray slows down or stops, remove the pump mechanism, reinsert it into the water, and slowly pump the trigger 8 to 10 times until the fine mist returns.