Colortrak Luminous Continuous Spray Bottle - Lilac Frost

The Luminous Spray Bottle produces a stream of sustained mist that lasts a few seconds with multiple pulls of the trigger, allowing large areas to be covered quickly and easily, holding sprays for 3 seconds, achieving continuous spray effect.

1. Filling the Bottle • Unscrew the top pump nozzle from the 250ml / 8.5oz bottle. • Fill the reservoir with clean water (use water only; other liquids can clog the mechanism). • Monitor the water level easily through the built-in quick-view window. • Screw the top nozzle back on securely. 2. Prime the Sprayer (First-Time Use) • Press the sprayer down into the bottle and twist slightly to the right to seal it. • Pump the trigger slowly 5 to 6 times to prime the internal "Flairosol" engine. • Note: Avoid pumping too quickly during this step, as rapid pumping can disrupt the initial pressure build-up. 3. Spraying • Continuous Mist: Pull the trigger multiple times in quick succession or hold it down briefly to release a sustained, fine mist that lasts for about 3 seconds per sequence. • 360-Degree Function: You can spray from any angle or orientation (even upside down) due to the full 360-degree distribution design. • Hand Fatigue Reduction: The ergonomic design makes it easy to pump without straining your hand during extended salon or home use. 4. Troubleshooting Clogs • If the spray output stops or clogs, remove the pump mechanism from the bottle. • Submerge the bottom intake of the pump into clean water. • Slowly pump the trigger 8 to 10 times until the fine mist resumes normal operation.